1 must be installed in the motor circuit fuse
When the motor is in operation, it may be grounded due to burnout of the winding insulation, or it may cause a short circuit due to collision of its terminals. In order to protect the power supply and quickly eliminate short-circuit faults, fuses must be installed in the motor circuit 2 . The rated current of the fuse can be 2.5 to 3 times the rated current of the motor. In this way, when the motor is over-spending, the fuse is not easily blown, and when a short-circuit fault occurs in the circuit, the fuse can be quickly blown to protect the motor. In certain heavy-duty overloaded electric circuits, the value of the rated current of the fuse can be increased by a large amount, which can effectively reduce the phase failure of the fuse (that is, the fuse blows a phase and causes a single-phase operation. The winding is burned out, but still has enough short-circuit protection.
2. Pay attention to observe the temperature change when the motor is running
If the motor temperature does not exceed the maximum allowable temperature of the insulating material used, the life of the insulating material is longer, more than 20 years; if the temperature exceeds the maximum allowable temperature, the insulating material will be aging, brittle and shorten the service life of the motor, serious When the insulation material will carbonize, change and hold the insulation performance, so that the motor burns out. Therefore, during the operation of the motor, if it is found that the motor temperature exceeds the maximum temperature, it shall immediately stop the inspection to avoid burning the motor. In addition, if it is found that the temperature of the motor is much lower than the maximum temperature, the load is too small, and the load can be increased or replaced with a low-power motor.
3. The correct choice of motor power
If the power selection is too large, it will cause waste and increase investment, and because the motor is often in a low-load operation, the efficiency and electric power are reduced, resulting in a decline in economic efficiency. Conversely, if the power selection is small, the motor will run overloaded, causing the speed to decrease and the temperature to rise, causing premature motor damage. Therefore, choosing the right power motor can improve the economic efficiency and prolong the service life of the motor.
Antiparasitics are a class of medications which are indicated for the treatment of parasitic diseases such as nematodes, cestodes, trematodes, infectious protozoa, and amoebas.
Antiparasitic Drugs,Discocercosis Ivermectin Injection,Acari Canis Ivermectin,2 Ivermectin Injection
Shandong Unovet Pharmaceutical Co.,Ltd. , https://www.unovetcn.com