With the improvement of living standards, people's taste of the living environment is also getting higher and higher, due to the beautiful shape of bamboo leaves, elegant and beautiful, often with potted plants placed on bookshelves, desks, coffee table, beautify the living room. However, due to its rapid growth, the compact and beautiful shape is often not durable and must be reshaped. The shaping method is now described as follows:
1. Pot control method: The ratio of the size of the flower pot to the plant should be 1:3. This can limit the growth of the root system and maintain the size of the plant type.
2. Take off the growth point: When the new bud grows to 2–3 cm, remove the growth point to promote the regeneration of branches and leaves on the stem, and can control the growth of the vine, so that the branches and leaves are flat and the plant shape is continuous. full.
3, the use of asparagus phototaxis: timely rotation of the direction of the flower pot, you can modify the shape of the growth of the leaves, keep the plant type unchanged.
4, object cover method: that is, use hard paper to suppress the leaves or cover the sun, so that the branches and leaves in the growth, the object will block the stem will turn or bending growth, so as to achieve the purpose of modeling.
5, a comprehensive application of several modeling methods:
(1) Tower type: Select 2 - 3 branches with tall and straight stems as the main peak, remove all growth points on the stem, and set the height of the plant to 30--35 cm. The remaining branches and new stems should not be higher than the main peak. For new shoots, depending on the thickness of the stem, it is decided whether to remove the growing point. If the stem is thicker than the stem of the main peak, it should be removed. If it is thinner than the main peak, it does not have to be picked and allowed to grow. At the same time, it is necessary to constantly adjust the plant shape by using the object hiding method and its own phototaxis.
(2) Double-cluster type: Planting a high-low and low-quality two plant bamboo in the pot, about 30 centimeters high, about 18 centimeters lower, and then the tower-shaped asparagus can be shaped like during the growth period.
(3) Natural style: Based on the naturally growing plant type of the asparagus, still adopts the basic methods such as removing the growth point, covering the material and using its phototaxis, so that the branches and leaves stretch, giving a natural beauty.
It should be noted that the shaping of the asparagus must be combined with controlling the fertilizer. That is, at room temperature 15-18 °C, poured once a week to make the basin soil moist (in order to press the finger is appropriate). No fertilizer or less fertilization.
1. Pot control method: The ratio of the size of the flower pot to the plant should be 1:3. This can limit the growth of the root system and maintain the size of the plant type.
2. Take off the growth point: When the new bud grows to 2–3 cm, remove the growth point to promote the regeneration of branches and leaves on the stem, and can control the growth of the vine, so that the branches and leaves are flat and the plant shape is continuous. full.
3, the use of asparagus phototaxis: timely rotation of the direction of the flower pot, you can modify the shape of the growth of the leaves, keep the plant type unchanged.
4, object cover method: that is, use hard paper to suppress the leaves or cover the sun, so that the branches and leaves in the growth, the object will block the stem will turn or bending growth, so as to achieve the purpose of modeling.
5, a comprehensive application of several modeling methods:
(1) Tower type: Select 2 - 3 branches with tall and straight stems as the main peak, remove all growth points on the stem, and set the height of the plant to 30--35 cm. The remaining branches and new stems should not be higher than the main peak. For new shoots, depending on the thickness of the stem, it is decided whether to remove the growing point. If the stem is thicker than the stem of the main peak, it should be removed. If it is thinner than the main peak, it does not have to be picked and allowed to grow. At the same time, it is necessary to constantly adjust the plant shape by using the object hiding method and its own phototaxis.
(2) Double-cluster type: Planting a high-low and low-quality two plant bamboo in the pot, about 30 centimeters high, about 18 centimeters lower, and then the tower-shaped asparagus can be shaped like during the growth period.
(3) Natural style: Based on the naturally growing plant type of the asparagus, still adopts the basic methods such as removing the growth point, covering the material and using its phototaxis, so that the branches and leaves stretch, giving a natural beauty.
It should be noted that the shaping of the asparagus must be combined with controlling the fertilizer. That is, at room temperature 15-18 °C, poured once a week to make the basin soil moist (in order to press the finger is appropriate). No fertilizer or less fertilization.
40m Laser Distance Meter is a functional and advanced measuring tools, no need climbing up and down, which is the engineers' best friends. No matter you have your own brand or not, JRT can help you to start with laser range finder business. JRT sold more than 1 million OEM laser distance meter modules last year, and we will triple or fifth times of that quantity.
We accept OEM/ODM and customized product.
>1. Logo printed customized: at the back of the instruments etc.
>2. Distance customized: 40m, 60m, 100m, 150m.
>3. Package box customized
Distance Measure Meter,40M Laser Distance Measure,Laser Distance Meter 40M,40M Laser Distance Meter
Chengdu JRT Meter Technology Co., Ltd , https://www.infrareddistancesensor.com