Correct installation method for electric sanitary grade quick-fit clamp ball valve fittings

Correct installation method for electric sanitary grade quick-fit clamp ball valve fittings

The electric hygienic quick-fit clamp ball valve fittings are designed and manufactured for applications requiring corrosion resistance and ozone resistance. The nut thread of the stainless steel joint is silver plated and pre-lubricated. The smaller size of the nut thread uses a wax seal, which not only effectively eliminates the "biting" of the stainless steel thread, but also reduces the assembly tightening torque by 40%.

First of all, the electric hygienic quick-fit clamp ball valve fittings are simple and convenient to operate, and do not require professional technology. For the majority of users, the installation method of stainless steel clamps is the first condition to be measured when purchasing clamps. Nowadays, with the continuous development of technology, the clamps have been widely used in our daily life, and it is The simple operation type meets the needs of many users and can be easily installed without professional technology, thus winning the trust of more and more users.

The correct installation method for the electric sanitary grade quick-fit clamp ball valve fittings:

(1) The spattering impurities during the welding of the end pipe and the snap ring affect the end pipe seal, and the welding slag on the sealing surface should be removed before installation to ensure the sealing effect.

(2) In the case where the position of the snap ring is determined, the size of the gap between the two pipe ends is determined by calculation based on the elongation of the pipe and the ambient temperature at the time of construction. Dimensional deviations should be ensured during construction.

(3) It is necessary to control the distance L of the snap ring from the end pipe. The control of L should be combined with the instruction manual. When the gap between the two pipe ends is small, it is necessary to ensure that the snap ring just sticks to the inclined surface.

(4) Under the premise of a certain moving distance, the weld height and width of the snap ring and the end tube are welded, and the perpendicularity error between the snap ring plane and the end tube axis is larger. The smaller the expansion and contraction amount of the joint is, the worse the use effect is.