How does the vibrating screening machine perform maintenance work in winter? When vibrating screening opportunities are produced in a lower temperature working environment than temperature problems affecting the output and screening accuracy of the equipment, how to maintain the equipment in winter to ensure the normal operation of the equipment and save equipment maintenance costs? The following Pioneer Vibrating Xiaobian elaborates on the 10 details that should be paid attention to in the winter maintenance of the vibrating screening machine , so that the lower temperature in the future is a reference for the maintenance of the equipment.
1. In case of snow weather or high winds of level 6 or above, stop the operation, and do not force the vibrating screening machine to work in the wind, foggy weather or mechanical failure above level 6;
2. Before the temperature is below zero, the lubricating oil of the vibrating screening machine should be replaced with the lubricating oil above -25#;
3. The construction site should have measures to prevent wind and snow. The machine should be thoroughly inspected and warmed up before daily work. It must be turned on after the vibrating screening machine is completely thawed, so as to avoid unnecessary loss caused by freezing of the equipment;
4. The weather is cold, the rubber sealing strip is easy to crack, and regular inspections are carried out to avoid leakage;
5. The temperature is low, the material sometimes freezes, so the operating load of the vibrating screen is also increased. Therefore, the material should also be selected. The temperature is low, the lazy inertia of the person is increased, and the monitoring of the equipment is not in place. Therefore, the operation of the equipment should also be monitored, and the vibration screening machine accident, the damage of the manufacturer and the equipment should not occur due to the improper monitoring. ;
6. Equipped with a person responsible for the elimination of accumulated water, ice and snow deposits, debris, etc. at the site of the vibrating screening machine to ensure that there is no water and ice on the working site of the equipment;
7. To improve the stress of the vibrating screen bearing. The impact load acting on the bearing depends on the amount of impulse acting on the rotor and the support flexibility of the bearing housing. Increasing the support flexibility of the bearing housing will reduce the impact load on the bearing. To this end, we can add a rubber plate of appropriate thickness between the bearing housing and the support frame to improve the support flexibility of the bearing housing. Due to the addition of the rubber sheet, the support flexibility is increased, thereby absorbing a part of the vibration energy, improving the bearing condition of the bearing and achieving the purpose of prolonging the service life;
8. Clean and lubricate the transmission part, clean and lubricate the gears, bearings, guide rods, etc., and seal the surface of the butter;
9. Finish the electrical parts. Clear dust and moisture protection;
10. In case of no use. Regularly check the condition of the equipment and find out the problem in time.
Tea Cup Holder,Diatomite Products,Soap Dish Diatomite,Soap Diatomaceos Earth
Dongguan Vanilla Bioengineering Co., Ltd. , http://www.healthecigarette.de