First, the mother pill: the mother pill is the basic particle of the pan-pill, which is the key to making water pill. First, spray a little cold water or spray it on the medicine pot (water pill screen), then sprinkle a small amount of powder, so that the powder is all wet and evenly adhered, then slowly brush the powder with a dry brush to form fine moist particles. Add a small amount of powder to make the particles gradually increase the spheronization as the medicine swayes. So spray water and powder to repeat the operation about 20 times, that is, there are fine pills.
Second, the pan-pill: take the mother pill in the above method in the drug sputum to repeatedly operate, add powder and binder, about 20 times into the size of the perilla seeds, and then a hundred times into a standard size of water pill. Pay attention to the swing of the medicine, so that the surface of the water pill is smooth and even in size.
3. Drying: The prepared water pill should be dried in a timely manner at low temperature. Those who contain aromatic drugs should only be placed in a ventilated place.
4. Coating and lighting: If the coating is required, the dried water pellets are moistened with a suitable liquid, added with a coating material, and then dried at a low temperature. Those who have to be lighted, use a rotating light to make the surface of the pellet moist and shiny.
V. Packing: The water pill is placed in a closed container or plastic bag to prevent moisture, high temperature and insect pests.
If you want to know more about pure water pill making , please log in to our company :< > Or directly dial the Pharmaceutical Technology Department : <> Consultation, our factory will provide you with more professional technical services!
Spice Novelties Co.,Limited , https://www.wholesale-adult-toys.cn