Lily picking and processing is a very important part of day lily production. The timely picking and scientific processing can not only increase the output, improve the quality, but also satisfy the market demand, accept the strict choice of consumers, and increase the international competitiveness and market share of this characteristic product.
First, the picking of day lily
(1) Picking time Day lily picking period starts in late June and ends in early August in Datong County, which lasted more than 40 days. Picking during the day of picking should be appropriate at 5-10 am.
(b) Picking method When picking, use a thumb and forefinger to grip the flower stalk, and gently break the flower pedicle and the mossy stalk joint, and pick it while picking it.
(3) The picking standards were picked early, the buds were not long enough, the weight was light, the yield was low, and the steamed slivers were fine brown and of poor quality. After being harvested, the flower buds have cracked or open, and not only the yield is low, but also the quality is poor. Therefore, the flower buds suitable for picking are large in appearance, loose in texture, unsplit in flower mouth, yellow in color, and three seams. Very obvious.
Second, the processing of day lily
The processing of lily is divided into four processes: steaming or pickling, drying, grading and packaging.
(a) Steamed lily should be steamed in time after picking.
1. Steam room construction. The steam room consists of a large iron pan and a small room on the pan. The side and ceiling of the room are closed and the front door is open. The room is divided into 3 to 4 floors and each floor is equipped with 2 screens. A 0-100°C thermometer is inserted on the side of the room and coal is used as fuel.
2. Steaming. Firstly put fresh yellow flowers in the sieve, each sieve put 5-6kg, thickness 12-15cm, ask for slightly higher in the middle, slightly lower around, showing a bread-like shape, then the middle lightly dig a concave, to be filled with fluffy loose, In order to heat evenly, the same degree of maturity. After installation, place the sieve in the steam room, close the door, and set the stove on fire. Increase the temperature of the steam room by generating hot air through the water in the pan. When the temperature reaches 70-75°C, keep it cooked for 3-5 minutes.
3. Steamed vegetables, buds covered with small drops of water. From yellowish green to light yellowish greenish, the fluffy flowerbed is immersed in 1/3-1/5; the flower body is soft, and the pedicel is slightly curved; the buds are squeaky and live inside and outside; the steamed buds are dried. Rate of 16% -20%, 5-6kg of fresh vegetables out of 1kg dried vegetables, good dried vegetable strips of thick meat, golden color, oily, strong regain, sugary, beautiful, good merchandise.
(B) Marinated From the introduction of the technology by Taiwanese businessmen in 1993, it was acquired locally and marinated on the spot. At the beginning, the additive was added to the water and stirred well, and then the fresh yellow flower was put in for marinating. In recent years, this technology has been further improved. The specific method is: mix the edible additive sodium metabisulfite with the fresh yellow flower that is picked or purchased, and mix it in a ratio of 3%-3.5%, and mix it in a closed container. Plastic bags), preserved in a greenhouse or in a well-lit place for 24 hours. Remove and control the moisture to dry. This method is simpler than conventional steaming method, saves labor, and saves fuel. The yellow color of the dried yellow flower is golden after processing. There is no commercial nature of the oil stick or the green strip after processing. The number of processing is not limited by the quantity, and the quantity is a few kilograms or more. One hundred kilograms can be carried out, especially on rainy days, it will not cause a lot of buds and rotten.
(III) Precautions
1. During the curing process, the germination rate increases with increasing temperature in the range of 20-60°C.
2. Strict control of the amount of additive sodium metabisulfite, in the rainy day lily can not be dried in time, extended pickling time, sodium metabisulfite should be 4% as well.
3. Additive Sodium metabisulfite, which decomposes during the salting process, has a corrosive effect on metal equipment. Therefore, do not use metal containers and instruments during processing.
4. Before eating, day lily should be washed 2-3 times with hot water.
(4) The water buds of dried buds are dispersed and the quality is stable, which is convenient for storage and transportation.
1. Cool and cool off. Steamed buds, it is best to maintain the original state, do not immediately sieve out, if the screen is not open when the turnover is not enough, you can also cool down the bud in the sun, but do not reverse the screen. When the sun is spread again, it is not easy to crotch, deformed, dry and straight, and tastes good. Put the sieve in a cool and ventilated place for 1-2 hours, and use the remaining heat to further ripen and make the sugar on the skin converge. Evenness, color and appearance.
2. Sun dried. Make a wooden frame, lower the height of the south, nail the prepared feast, make a sun bed, place it in a well-lit place, and evenly spread the cool day lily or pickled lily. On the mat, flip 1-2 times a day, and use the double seats on the first day. That is to say, an empty seat is used to cover the sun bed, and it is clamped and flipped. It is fast and not sticky, and the buds do not bend after being dried. Can not be turned over when it is not half dry, to prevent curling after drying, usually two days to dry. The savory dish is not crispy when held by hand and spreads naturally when loosened.
(five) Grading
1. First class food. Golden color, oily, sliver long uniform, a small amount of cracked mouth no more than 1cm, no mildew, no impurities, no insects.
2. Second class food. Yellow color, oily, sliver thick uniform, a small amount of crack not more than 1.5cm, half light oil stick not more than 5%, no mildew, no impurities, no insects.
3. Third class food. Light yellow color, low oiliness, short slivers, cracked mouth, no more than 10% of half oily vegetables, no mildew, no impurities, no insects.
(VI) Packaging
The packaging is the last process of daylily processing. The quality of the packaging directly affects the sales and good packaging. It caters to the busy customers. Especially after joining the WTO, a good product can have a place in the market. Packaging is It is very important, therefore, the packaging is very important in the processing of daylily. Firstly, the well-graded lily is straightened one by one. It is packed in 100g, 250g, 350g, 450g and then 10 bags into a box, very much from inside to outside. Refined and beautiful, Datong Jincai brand, Wutian brand sent to sales around.
Cosmetics are compound mixtures made of various raw materials through reasonable deployment and processing. Cosmetics have a wide variety of raw materials with different properties. According to the raw material properties and uses of cosmetics, it can be roughly divided into two categories: matrix raw materials and auxiliary raw materials.
The former is a kind of main raw material of cosmetics, which occupies a large proportion in cosmetic formulations and plays a major functional role in cosmetics. The latter is responsible for shaping, stabilizing or imparting color, fragrance and other properties to cosmetics, which are not used in cosmetic formulations, but are extremely important. Cosmetics are chemical mixtures made of natural, synthetic or extracted substances with different functions as raw materials and processed through production procedures such as heating, stirring and emulsification.
Our company provides various cosmetic raw materials
Beta Arbutin Powder,Cosmetic Raw Materials,Kojic Acid Dipalmitate Powder,Nicotinamide Mononucleotide Powder
XI AN RHINE BIOLOGICAL TECHNOLOGY CO.,LTD , https://www.xianrhinebiotech.com