The double cone mixer is composed of a single-stage reducer (continuously variable speed), a transmission part, a cylinder cover, a cylinder body, an inner spiral, an outer spiral belt, and a discharge valve. The mixer is available in a variety of styles, scrapers, inner spirals, and outer ribbons. The mixer produces a pressure type mixer with a viscosity exceeding 500,000 centipoise according to the needs of the user.
The double-cone mixer has strong adaptability to the mixture, and does not cause overheating on the heat sensitive material; the granular material will not be crushed and ground; the mixture of materials with different specific gravity and different particle sizes will not cause delamination; Mixing of various granules, fibers or flake materials such as coarse, fine and ultrafine powders also has good adaptability.
Due to the special shape of the double cone mixer, a jacket can be added outside the cylinder for the introduction of cooling medium or heat medium. The cylinder can be operated under normal pressure or vacuum, indicating that the machine has multiple uses. Sex.
The double cone mixer has the following effects:
1. Mixing effect The standard double-cone mixer has two stirring spirals. In practical applications, single (one long spiral), double (one or two asymmetric spirals) and three (two short ones) can be used according to the size of the equipment. Long symmetric arrangement) root spiral.
2. Cooling heating can increase the jacket outside the double cone mixing machine cylinder, and realize the cooling or heating of the material by injecting the cold heat medium into the jacket; the cooling is generally pumped into industrial water, and the heating can be steamed or electrically heated. oil.
3. Add liquid mixture into the spray pipe at the intermediate shaft position of the double cone mixer, connect the atomizing nozzle to achieve liquid mixing; by selecting specific materials, acid and alkaline liquid materials can be added for powder mixing.
4. The pressure-resistant cylinder cover can be made into a dome. When the residue is reduced for easy cleaning, the pressure resistance of the cylinder part of the double-cone mixer can be improved. This setting is often used when the pressure of the cylinder of the double-cone mixer is required.
5. Negative pressure feeding In the specific process, the double cone mixing body can be made into a negative pressure chamber, and the dry material with good fluidity can be sucked into the mixing chamber for mixing, which can avoid the residue and pollution in the material feeding link. .
6. Discharge method Standard type equipment generally adopts plum-shaped “displacement valveâ€. This valve is closely attached to the bottom of the long spiral to effectively reduce the dead angle of the mixture. The driving form is manual and pneumatic. The butterfly valve can also be installed according to the user's needs. , ball valve, star unloader, side discharge, etc.
Dehydrated White Radish Shreds
When I was a child, my family was short of supplies. When the radishes came down, my grandmother would make salted shredded radishes and store them for winter consumption. When making seasoned dehydrated shredded white radish, you can also use a household heater to separate it if there is not enough sunlight outside. When needed, the processed radishes can be placed on a clean bamboo curtain, close to the heater, and the heat released by the heater can dry the radishes. Dehydrated shredded white radish should be turned frequently during the drying process. After about four or five days, he can be dehydrated and air-dried. At this time, he can continue to bask for two days. It is then collected and placed in an airtight container. Homemade dehydrated shredded radish can be stored in a dry environment.
Dehydrated White Radish Shreds,Flavored Dehydrated White Radish Shreds,New Crop Dehydrated Radish Shreds,Homemade Dehydrated Shredded Radish
Laian Xinshuyu Food Co., Ltd , https://www.xinshuyufood.com