How to detect the oxygen content in the centrifuge of a pharmaceutical factory? Corrosive gas oxygen content testing can only be achieved with Austrian optical oxygen analyzer
How should the oxygen content in the centrifuge be detected?
5 horizontal centrifuges, containing flammable and explosive materials such as C12H27N, and nitrogen- filled during feeding. For safety reasons, an oxygen content analyzer is added to monitor the oxygen content of the inner chamber in real time to prevent explosion. How should the oxygen content analyzer be selected?
answer:
Centrifuges have been widely used in the pharmaceutical and pesticide industries as production equipment. However, the specificity of the applications, processes and media used in these industries, the centrifuges have explosion-proof requirements, and the oxygen content of the inner chamber needs to be analyzed.
At present, the common detection methods in the industry are nitrogen replacement protection and simple configuration of oxygen content detectors, which are mostly provided by equipment manufacturers. However, since the feed medium is mostly organic solvents such as methanol, ethanol, toluene, acetone, cyclohexane, etc., if there is no perfect pretreatment device for drying, filtering, and removing lipids, the oxygen detector is highly corrosive, and the life is only one week. Even shorter. Frequent replacement not only increases business costs, but also jeopardizes production safety. How to detect the oxygen content in the centrifuge of a pharmaceutical factory? Corrosive gas oxygen content testing can only be achieved with Austrian optical oxygen analyzer
At present, the common test method in China is to use the electrochemical oxygen analyzer supporting pretreatment system, which is theoretically feasible, but no one has done a good job. Generally, the electrochemical oxygen sensor is broken for one month, a little better for half a year. The pretreatment system does not remove the acid gas from the centrifuge, and the electrochemical oxygen sensor is simply unstoppable.
There are also manufacturers using the laser method of the oxygen analyzer, the price between 150,000 and 200,000, the pit die is expensive, you have to choose. How to detect the oxygen content in the centrifuge of a pharmaceutical factory? The oxygen content of corrosive gases can only be determined by the Austrian optical oxygen analyzer. The Austrian optical oxygen analyzer adopts direct plug-in online installation, the price is tens of thousands of RMB, it can be used for a long time, the stability is good, and the pretreatment is omitted. trouble. Relative electrochemical oxygen analyzers and laser oxygen analyzers have an irreplaceable position. It can be said that the pharmaceutical plant centrifuge oxygen analyzer chooses the Austrian TecSense optical oxygen analyzer is the best choice, without hesitation.
The use of a new generation of Austrian TecSense optical oxygen analyzer can be said to be a good choice for cost-effectiveness. How to detect the oxygen content in the centrifuge of a pharmaceutical factory? The detection of oxygen content in corrosive gases can only be solved with the Austrian optical oxygen analyzer. The explosion in the centrifuge of the pharmaceutical factory is prone to explosion when the oxygen content exceeds the standard. Because the centrifuge contains acid gas corrosive gas, the electrochemical oxygen analyzer is used. It is not advisable to change the probe for half a month. It is hard work and must not be used. It is recommended that you use the optical oxygen analyzer imported from TecSense of Austria. The cost performance is very high, and it has been widely promoted in the global pharmaceutical factory. Oxygen analyzer for content monitoring - Austrian TecSense optical oxygen analyzer. How to detect the oxygen content in the centrifuge of a pharmaceutical factory? Corrosive gas oxygen content testing can only be achieved with Austrian optical oxygen analyzer
How to detect the oxygen content in the centrifuge of more pharmaceutical factories? Corrosive gas oxygen content testing can only be used with Austrian optical oxygen analyzer. Please contact the British Instruments (Shanghai) Co., Ltd. for information.
Blackout greenhouse ,Light dep greenhouse ,Auto light deprivation greenhouse,Blackout green house,film greenhouse
JIANGSU SKYPLAN GREENHOUSE TECHNOLOGY CO.,LTD , https://www.greenhousehydroponic.com