1. Apply sufficient organic manure and increase the application of phosphorus and potash fertilizers. Planting is not too dense. Infinity-growing varieties are planted for about 4000 plants per acre. Before the tomato blossoms, the shed is evenly spread with 1 layer of plant ash to reduce the humidity, increase the temperature of the ground, supplement the potash fertilizer, and enhance the resistance of the plants. The twigs were twiged in time and the old leaves and the flowers were removed.
2. Enhancing ventilation and light transmission is an important measure to control the occurrence of gray mold. It is well-ventilated in sunny days and has little ventilation in cloudy days. The weather in rainy days and temperatures below 13°C is not ventilated. The dust on the membrane is often cleaned, and the sky is exposed using scattered light to ensure the light in the shed.
3, the use of high ridge cultivation, covering the film, irrigating when planting water, after appropriate control of water after the seedlings, watering should be selected in the morning of the film under the sunny, closed after the watering temperature of 30? 32 hours after the release of moisture and humidity.
4, to change the flowers for spray. Alfalfa flowers can easily accelerate the transmission of gray mold, and can be sprayed with a rhododendron. When using a hand-held small sprayer to spray 2-3 flowers on an inflorescence of a tomato, spray the flowers with a concentration of 10-25 mg/kg. About 50% of the flowers are sprayed again when they are open. When the disease is severe, quick keratin may be added in an effective amount of 0.10% in the formulated liquid and sprayed together.
5, timely prevention and treatment after onset
Ecological control is the use of temperature and humidity conditions to control the occurrence of diseases. Select warm weather in the morning on sunny days. After the temperature reaches 33°C, keep it for a short period of time and release the air. When the temperature is above 25°C, continue to release the air, keep the temperature in the afternoon at 25 to 23°C, and stop the air release when the temperature drops to about 20°C. The night temperature stays at 15 to 17°C. For diseased organs that cannot be easily removed, use a candle flame to smoke the diseased part at the beginning of the disease to reduce the risk. After the emergence of the diseased plants, it is necessary to reduce the number of people walking between the plants, and not to shed sheds between the sheds where the disease has developed and which has not yet occurred, so as to avoid transmission. Using brown sugar fermentation broth, the preparation method is: Take brown sugar, white yeast, water, mix according to the ratio of 30:1:50, ferment at room temperature for 15-20 days, add 10 parts of rice vinegar and shochu, diluted 100 times. The plants were sprayed at a distance of 7 days and sprayed once for 4 to 5 times. They were used at the beginning of the disease and they could receive good control effects.
China Moisturizing Suppliers
Here you can find the related products in Moisturizing, we are professional manufacturer of Moisturizing. We focused on international export product development, production and sales. We have improved quality control processes of Moisturizing to ensure each export qualified product.
If you want to know more about the products in Moisturizing, please click the Product details to view parameters, models, pictures, prices and Other information about Moisturizing.
Whatever you are a group or individual, we will do our best to provide you with accurate and comprehensive message about Moisturizing!
Hyaluronic Acid, Sericin Powder, Polyglutamic Acid, squalane,Vitamin B5,Panthenol
Xi'an Gawen Biotechnology Co., Ltd , https://www.ahualyn-bios.com