During the process of moving or transporting, the product may be damaged and the internal product may be damaged. If the damage is prevented in advance, the drop test machine may be used to test the solution, so as to obtain a solution to minimize the loss during the transportation. Drop test machines are widely used in commodity inspection, enterprises, technical supervision institutions and institutions. It can be used for test surface drop, corner drop, edge drop, etc. The following is the operation method of the drop test machine . Only the correct operation can guarantee accurate test results.
The correct operating procedures for the drop tester are as follows :
1. Turn on the power switch and the power light is on. (At this time, it is strictly forbidden for personnel who have not been trained to enter the yellow warning line to do any relevant test operations. It is very dangerous), check whether the two wings are in the horizontal position, otherwise the hand plate is in the horizontal position;
2. Place the test specimen on the two wings and fix it with a clamp; everyone stands outside the safety line.
3. Press the up button to raise the two wings to the required test height, and press the stop button to stop the rise;
4. Press the falling key, the test item is free to fall, the test is completed, and the condition of the sample after the drop test is recorded;
5. Test the other products according to the above 2~4 test methods, and perform the free drop test according to the required surface, angle and edge.
Label: Drop test machine
Propionates Powder,Calcium Propionate Fungicide,Calcium Propionate,Propanoic Acid Calcium Salt
Wuxi Yangshan Biochemical Co.,Ltd. , https://www.salesacetates.com