High Quality Hospital Equipment Mobile X-ray Plx102 Medical

Model NO.: Plx102
Trademark: Better
Origin: China
HS Code: 9022199090
 
Specifications
Power Output  3KW  
X-Ray Tube Fixed anode
Commute Method Full wave commutation
Tube Voltage 40~90KV

Tube Current
 		 50~90KV 15mA 
50~90KV 30mA 
40~80KV 50mA

Exposure Time   
 		 50~90KV 15mA 0.1~6.3s 
50~90KV 30mA 0.1~6.3s 
40~80KV 50mA 0.1~1.5s
Power Supply 220V±10%  60Hz
inner-resistance≤1.0Ω 4KVA
Operation Method   Wire /Wireless control
20 meters microwave remote control exposure. .( Advantage) . It is different from infrared remote control exposure, does not suffer any obstacles in the way.

Features :
1. Structure designed based on anthropotomy, with beautiful 
    appearance, and easy to operate.
2. With high frequency inverter to emit high quality X-ray and low
    dose on skin, and ensure excellent definition and contrast of pictures.
3. Color LCD display, automatic X-ray tube test with memory for 
    convenient operation.
4. With a high-quality knockdown x-ray generator to reduce 
    irradiation, which is much safer to environment and operator.
5. Electrically controlling the ascending & descending of the 
    rocker, and it can be left and right swing at a range of ± 90°,
    which enables more flexible and more convenient radiograph.
6. With a built-in backup battery to enable work after power interrupted, and without 
    any special requirement to power supply,  and with multifunction of safeguard.

High Quality Hospital Equipment Mobile X-ray Plx102 Medical

 

Water Test

Water is vital to human life. Drinking water, swimming pool water, SPA water, aquarium water, pond water, related to the quality of everyone's life, how do you ensure the quality of water? Water quality test strips, of course. These convenient and easy-to-use strips quickly and accurately test for a range of contaminants and keep you and your family safe.


Water Quality Test Introduction
Water Quality Test Strips can provide Fast and Accurate water test results for 39 parameters such as pH, Total alkalinity,Residual chlorine,Total chlorine,Nitrate, NitrIte, Hg, Lead, Iron, Copper, Fluoride, Cyanuric acid, Bromine, Cr, Hardness, Sulfate, Carbonate root, Hydrogen carbonate root, Quaternary ammonium salt, Potassium permanganate,Sulfite, VC, Calcium, hydrogen peroxide, Escherichia Coli, phosphate, Sulfuretted Hydrogen, chlorine dioxide, peracetic acid,sulfur dioxide, Ammonia Nitrogen, Ammonium Chloride,lodine,Aluminum,Zinc,salt kalium/potassium, manganese,phosphorus.
We offers a full line of high quality, professional Aquarium test strips, Pool & Spa test strips and Drinking Water Test Strips to help customers meet their water testing requirement.

TEST PROCEDURE
Immerse the strip for 2 seconds and then remove the strip.
Do not shake excess water off, and then hold the strip horizontally for 20 seconds.
Compare against the color chart and read immediately within 30 seconds to get accurate result.
IMPORTANT TO KNOW
1.Test for 30 seconds
When using the water test strip, your results are complete (ready to compare) after dipping the
test strip. Upon completion, make sure to compare your results immediately. The strip is no
longer valid outside of the 30 second testing period Discard the test strip after 60 seconds as
any further color change will be meaningless.
2.Prevent altered results
Here`s what you can do to prevent decreased shelf life of the strip and altered results
Do Store in a cool dry place away from direct sunlight.
Do read the instructions carefully before use.
Do Avoid touching or polluting test areas of the strip.
Do not place wet fingers in the bottle.
Do Keep the cap on tight between use.
Do not remove the desiccant pouch.
3.Primary and Secondary water Regulations
The EPA sets legal limits on over 90 contaminants in water test strip. There are two categories,
primary and secondary. Primary contaminants are substances that can be toxic in small amounts
On the other hand, secondary contaminants are less toxic species and would include cosmetic
issues (color, taste, and odor) of water. These strips test for the most commonly found primary
contaminants lead, fluoride, copper, chlorine, nitrite, nitrate) as well as the most commonly found
secondary contaminants(Copper, Iron, Sulfate, Zinc, Manganese, Fluoride, Chloride, and pH)



Water Test,Fish Pond Water Testing,Ph Water Tester,Water Quality Testing

Changchun ZYF science and technology CO.,LTD , https://www.zyf-medical.com

Posted on