Characteristics and performance of the breathing valve:
The valve body of the breathing valve can withstand a water pressure of 0.2Mpa without osmosis and deformation. The low temperature resistance of the breathing valve is greater than 70% in air and the lowest temperature is -30 °C. After 24 hours of freezing, the valve opening pressure meets the working pressure requirement (allowing the pressure difference is plus or minus 20pa).
When the valve disc component of the GTQ type snorkel is operated, the sensitivity is high, and the seal is ensured after the operation is completed. There is enough space in the valve to ensure the ventilation of the tank. Before the breathing valve reaches the working pressure: the nominal diameter is ≤150mm, the leakage is ≤0.04m3/h; the nominal diameter is ≥220mm, the leakage is ≤0.4m3/h; when the breathing valve reaches the working pressure: the valve disc is immediately Open to ensure normal ventilation requirements for the tank.
Main specifications / special features:
Features and performance:
The new pipe flame arrester is made of cast iron, cast steel, stainless steel and aluminum alloy with good corrosion resistance. The valve disc and the valve sealing ring are made of stainless steel tetrafluoroethylene. Low temperature resistance and good antifreeze performance. The valve is a ventilation device installed on the fixed top tank to reduce the evaporation loss of the oil and control the pressure of the tank. The valve has large ventilation, small leakage, corrosion resistance and good antifreeze performance. It can automatically adjust the pressure inside and outside the oil storage tank.
The gas flame arrester has a simple structure, light weight, easy maintenance and convenient installation. The hydraulic test is qualified. Low temperature and antifreeze passability: No pressure is applied to the pressure valve disc, vacuum valve disc and seal ring after being operated at -42 °C for 2 hours. Fully meet the standard requirements. Continuous operation at normal temperature of 36 ° C for 72 hours, 10,000 operations, pressure valve disc, vacuum valve disc and guide rod contact surface without any signs of wear and bruise, the guide rod lift sensitive and no jam.
What is Nutrient supplements?
Nutritional supplements are preparations used to supplement nutrients that may be lacking in the body's daily diet. These formulations may be single or a combination of multiple nutrients, including but not limited to the following ingredients:
- Protein (e.g. protein powder)
- Fish oil (contains omega-3 fatty acids such as DHA)
- Various vitamins (such as vitamin A, B vitamins, vitamin C, vitamin D, vitamin E, etc.)
- Minerals (e.g. calcium, iron, zinc, selenium, etc.)
- Dietary fiber
- Other specific nutrients, such as Amino Acids, enzymes, probiotics, plant extracts, etc
The purpose of nutritional supplements is to meet the nutritional deficiencies that individuals may have due to special needs, dietary habits, digestive and absorption problems, health conditions (such as disease, pregnancy, aging, etc.) or other reasons. They are usually available in the form of tablets, capsules, oral liquids, powders, etc.
When choosing a nutritional supplement, one should consider an individual's physical condition, diet, and possible side effects. Although nutritional supplements can provide additional nutrients, it does not mean that they are a substitute for a balanced diet. The best strategy is usually to get most of your nutrients through a varied diet and use nutritional supplements when necessary under the guidance of a medical or professional. In addition, excessive consumption of certain nutritional supplements may also pose health risks, so it is recommended to consult a professional before use.
Nutrient Supplements,nutrient supplements benefits,nutrient supplements for the aged,nutraceuticals ingredients,Nutrient supplements manufacturer
Xi'an Day Natural Inc. , https://www.dayextract.com